Ozone is perhaps nature's most powerful purifier. It is widely used to purify drinking water because it is pH neutral, chelates metals and destroys pathogens and other organic contaminants quickly and with no residual chemicals remaining in the water. Despite ozone's (O3) great potency, nearly all systems on spas utilize designs that fail to address the three critical components needed for successful water purification. These components are:
1) Concentration of Ozone You must produce enough ozone at high concentration to purify and you must do so year after year without significant change in ozone output.
2) Contact Time The Ozone must come in contact with the contaminants and have enough time to react.
3) Off-Gas Destruction Any ozone that has not reacted must be converted back to oxygen to prevent unwanted oxidation.
The Peak Ozone System™ is the only system used on portable spas that successfully accomplishes the above. Here's how...
We begin with a Cold Fusion Corona Discharge Ozone Generator that is certified to produce 0.5 g/hr of ozone at a high concentration flow rate of 1.25 - 2 l/min. To ensure we have as much of the ozone mixed into solution as possible, we force it through a patented Mazzei™ Injector. This pushes the ozone into a vacuum where the molecules are shattered into fragments smaller then water particles. Approximately 99% of the ozone will be mixed into solution as a result of this process.
Next, the ozone is kept in solution for a minimum contact time of 18 seconds to allow it to oxidize organic contaminates from the impure spa water. This is done by forcing the water through our Static Mixing Chamber. This special chamber utilizes the latest in mixing technology within the Tri-Pac Reaction Zone. The goal here is to increase contact time by slowing down the water flow, further mixing the ozone and facilitating a reaction.
